OEM 220V 50Hz R22 Ceiling Mounted Air Conditioner 24000 BTU

220V/50Hz R22 Ceiling-Mounted Cassette Type 24000BTU High Quality Wifi Control PCB 3 Year Warranty


Ceiling air conditioner
Innovative air-conditioning design concept, the indoor unit is hoisted on the ceiling, wide-angle air supply on all sides, rapid temperature adjustment, and will not affect the interior decoration.
According to the air-conditioning function, the air-conditioning can be divided into single-cooling air-conditioning and heating and cooling air-conditioning. Single-cooling air conditioner: It has no heating function and is suitable for areas with hot summer or sufficient heating supply in winter. Heating and cooling air conditioner: with heating function

Ceiling Mounted Air Conditioner Precautions
- The window can be opened for a short time during indoor ventilation, and the window opening time is generally no more than 10 minutes
- The air filter should be cleaned regularly, otherwise the air flow will be blocked, resulting in insufficient air volume and increased room temperature
- To adjust the temperature during sleep, the air conditioner can automatically adjust the sleep temperature
- The outdoor unit must be installed firmly to reduce vibration and noise. There must be enough space in front of the suction and exhaust vents of the condenser for ventilation. If the wind is blocked, the condensation pressure will increase and it will cause shutdown;
- There should be no obstacles in front of the indoor unit, otherwise the wind will be affected;
When the air conditioner is running for rapid cooling, the selector switch can be adjusted to the high gear, and after the temperature drops, it can be adjusted to the medium-speed low gear;
- The ventilation switch can be used for the ventilation of the window air conditioner, but the ventilation time should not exceed 15 minutes;

In 2015, Yuetu moved to Ninghua from Wenzhou, and covering an area with 300,000 square meter. There are total 12 production lines with 3 million sets production capacity annually and 95% of the parts self produced, such as heat exchanger, welding, bending, automatic coating, plastic injection, and so on.